TAIGTurn 3029CR CNC-Ready Lathe 5C vs 4029CR CNC-Ready Lathe
Technical comparison · Turning (lathe)
| Parameter |
TAIGTurn 3029CR CNC-Ready Lathe 5C
Taig
F2 · Intermediate
|
4029CR CNC-Ready Lathe
Taig
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~1550–1700 € | ~1950–2050 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 60.96 × 78.74 × 35.56 cm | 60.96 × 78.74 × 35.56 cm |
| Weight (kg) | 40.82 kg | 40.82 kg |
| Z-axis height (mm) | 152.4 mm | 152.4 mm |
| Power (W) | 186.4 W | 186 W |
| Voltage (V) | — | 110 V |
| Maximum speed | 1800 rpm | 1800 rpm |
| Declared precision | 0.00508 mm | 0.00508 mm |
| Category specs | ||
| Swing over bed (mm) | — | 88.9 mm |
| Distance between centers (mm) | — | 152.4 mm |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine ships without axis motors, control electronics or software; the user is responsible for completing the drive system. The pre-installed NEMA 23 mounts are compatible with the main open-source and commercial CNC controllers, including LinuxCNC and Mach3. No cloud connectivity or subscription is required at any stage of operation. | The 4029CR ships without a controller or software: the control system integration is entirely the user's responsibility. It is compatible with common solutions in the Taig and DIY builder ecosystem, including Mach3, Mach4, and LinuxCNC, paired with NEMA 23 motor drivers (motor mounts are included). Software choice depends entirely on the control hardware selected. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.