TAIGTurn 3029CR CNC-Ready Lathe 5C vs 4019CREXT CNC-Ready Lathe
Technical comparison · Turning (lathe)
| Parameter |
TAIGTurn 3029CR CNC-Ready Lathe 5C
Taig
F2 · Intermediate
|
4019CREXT CNC-Ready Lathe
Taig
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~1550–1700 € | ~1700–1850 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 60.96 × 78.74 × 35.56 cm | 60.96 × 86.36 × 35.56 cm |
| Weight (kg) | 40.82 kg | 36.29 kg |
| Z-axis height (mm) | 152.4 mm | 228.6 mm |
| Power (W) | 186.4 W | 186 W |
| Voltage (V) | — | 110 V |
| Maximum speed | 1800 rpm | 1800 rpm |
| Declared precision | 0.00508 mm | 0.00508 mm |
| Category specs | ||
| Swing over bed (mm) | — | 88.9 mm |
| Distance between centers (mm) | — | 228.6 mm |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine ships without axis motors, control electronics or software; the user is responsible for completing the drive system. The pre-installed NEMA 23 mounts are compatible with the main open-source and commercial CNC controllers, including LinuxCNC and Mach3. No cloud connectivity or subscription is required at any stage of operation. | The 4019CREXT ships without a controller or software: the control system integration is entirely the user's responsibility. The included NEMA 23 motor mounts simplify pairing with standard stepper drivers. The most common solutions in the Taig ecosystem are Mach3, Mach4, and LinuxCNC; the choice depends on the control hardware selected. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.