Taig TAIGTurn 3019 DSLS Full CNC Lathe vs Taig Micro Lathe II L1017ER
Technical comparison · Turning (lathe)
The comparison analyzes two Taig turning solutions, distinguished by their degree of automation and electronic integration. The Taig TAIGTurn 3019 DSLS is a complete CNC system, while the Micro Lathe II L1017ER is a manual mechanical platform intended for custom integration.
| Parameter |
TAIGTurn 3019 DSLS Full CNC Lathe
Taig
F2 · Intermediate
|
Micro Lathe II L1017ER
Taig
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~2550–2850 € | ~380–480 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 60.96 × 78.74 × 35.56 cm | 39.37 × 41.91 × – cm |
| Weight (kg) | 36.29 kg | — |
| Z-axis height (mm) | 152.4 mm | 228.6 mm |
| Maximum speed | 1800 rpm | 7000 rpm |
| Declared precision | 0.0127 mm | 0.0127 mm |
| Category specs | ||
| Swing over bed (mm) | — | 114.3 mm |
| Distance between centers (mm) | — | 247.65 mm |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The machine ships with a Mach 3 license, the most widely used CNC control software in the maker and prototyping segment. The Microproto Systems DSLS controller handles closed-loop operation, and the Digital Index Signal Processor (DISP) enables single-point threading. No cloud connectivity or software subscription is required. | The lathe is entirely manual and is supplied without any drive components: motor, pulleys and power feed are not included and must be sourced separately. No software interface or CNC control is provided. |
The differences that matter
- Price: TAIGTurn 3019 DSLS Full CNC Lathe 2700 € vs Micro Lathe II L1017ER 430 € — Micro Lathe II L1017ER wins (+528%)
Which one to choose
Choose TAIGTurn 3019 DSLS Full CNC Lathe if…
Choose the TAIGTurn 3019 DSLS if the goal is the production of precision components with complex geometries via numerical control, benefiting from the closed-loop system and automated threading capability.
Choose Micro Lathe II L1017ER if…
Choose the Micro Lathe II L1017ER for manual turning applications or for users who intend to build a custom CNC system starting from an economical mechanical base, managing the motorization and control electronics independently of the original manufacturer Taig Tools. The reduced cost allows investing the remaining budget in tooling or custom automation systems according to the specific needs of the maker workshop. The higher maximum speed of 7000 rpm offers advantages on machining soft materials or small diameters compared to the 1800 rpm limit of the pre-assembled CNC model. The greater distance between centers of 247.65 mm allows for machining longer parts compared to the standard configuration of the 3019 DSLS model. The main differences lie in the integration of the DSLS CNC control system with Mach 3 license included in the 3019 model, versus the purely mechanical nature of the L1017ER model. The 3019 model offers a ready-to-use solution for digital prototyping, while the L1017ER model requires mechanical and electrical assembly skills to be made operational in automated mode. The price gap of approximately 6.3 times reflects the inclusion of the controller, motors, and software in the 3019 package compared to the supply of only the lathe bed of the L1017ER model. Taig TAIGTurn 3019 DSLS vs Taig Micro Lathe II L1017ER: comparative analysis between an integrated CNC system and a manual mechanical platform for makers. Technical comparison between two Taig lathes to evaluate CNC automation versus the flexibility of a custom manual configuration.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.