S30 Pro Max 20W vs S30 Ultra 11W Laser Engraver
Technical comparison · Diode laser (405–460 nm)
Tabella comparativa tra Sculpfun S30 Pro Max 20W e Sculpfun S30 Ultra 11W Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Diode laser (405–460 nm).
| Parameter |
S30 Pro Max 20W
Sculpfun
F2 · Intermediate
|
S30 Ultra 11W Laser Engraver
Sculpfun
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2022 | 2023 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 899.99 € | 699 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 55.5 × 59.5 × 21 cm | 80 × 84 × 22 cm |
| Work area (mm) | 370 × 360 mm | 600 × 600 mm |
| Power (W) | 120 W | 84 W |
| Voltage (V) | 240 V | 24 V |
| Maximum speed | 6000 mm/min | — |
| Declared precision | 0.005 mm | 0.005 mm |
| Category specs | ||
| Short side area (mm) | 360 mm | 600 mm |
| Nominal laser power (W) | 20 W | 11 W |
| Laser source technology | diode | diode |
| Maximum travel speed (mm/s) | 100 mm/s | — |
| Maximum working speed (mm/s) | 100 mm/s | — |
| Cut depth per material | 12 mm (acrylic), 10 mm (wood) | — |
| Laser wavelength (nm) | 455 nm | 455 nm |
| Minimum achievable resolution (µm) | 5 µm | — |
| Autofocus system module | False | False |
| Rotary module included | False | False |
| Passthrough structural slot | False | False |
| Control software interface | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Fully compatible with standard software like LightBurn and LaserGRBL via USB or Bluetooth connection. It does not require proprietary platforms. | Fully compatible with industry-standard software such as LightBurn and LaserGRBL. The 32-bit motherboard supports Bluetooth connectivity for wireless control and future expansions. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.