Sculpfun S30 10W vs S9 Pro Laser Engraver
Technical comparison · Diode laser (405–460 nm)
Tabella comparativa tra Sculpfun Sculpfun S30 10W e Sculpfun S9 Pro Laser Engraver basata sui dati tecnici ufficiali per la lavorazione Diode laser (405–460 nm).
| Parameter |
Sculpfun S30 10W
Sculpfun
F2 · Intermediate
|
S9 Pro Laser Engraver
Sculpfun
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2022 | 2022 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 599.99 € | 499 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 55.5 × 59.5 × 21 cm | — |
| Weight (kg) | — | 3 kg |
| Work area (mm) | 380 × 385 mm | 400 × 410 mm |
| Power (W) | 84 W | 60 W |
| Voltage (V) | 240 V | 240 V |
| Maximum speed | 25000 mm/min | — |
| Declared precision | 0.005 mm | 0.01 mm |
| Category specs | ||
| Short side area (mm) | 380 mm | 400 mm |
| Nominal laser power (W) | 10 W | 10 W |
| Laser source technology | diode | diode |
| Cut depth per material | — | 15mm wood, 10mm acrylic |
| Laser wavelength (nm) | 455 nm | 450 nm |
| Minimum achievable resolution (µm) | 5 µm | 10 µm |
| Autofocus system module | False | False |
| Rotary module included | False | False |
| Control software interface | ['lightburn', 'other'] | ['lightburn', 'other'] |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The 32-bit motherboard is fully compatible with LightBurn (including M8 air control) and LaserGRBL. It also supports Bluetooth connectivity and offline printing via SD card. | Compatible with major engraving software like LightBurn and LaserGRBL. It connects via USB and supports files in NC, BMP, JPG, PNG, and DXF formats. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.