Prusa Research XL vs Qidi Tech Q2 3D Printer
Technical comparison · Fused filament fabrication (FFF/FDM)
XL and Q2 3D Printer are not direct competitors: very different prices (~3.6×). Q2 3D Printer costs less (~€499) and is the entry-level choice; XL offers more capability at a higher price (~€1800). Judge them by budget, not head-to-head.
| Parameter |
XL
Prusa Research
F2 · Intermediate
|
Q2 3D Printer
Qidi Tech
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2025 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~1700–1900 € | 499 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 40.2 × 43.8 × 49.4 cm |
| Weight (kg) | — | 18.1 kg |
| Work area (mm) | 300 × 300 mm | 270 × 270 mm |
| Z-axis height (mm) | 330 mm | 256 mm |
| Power (W) | — | 630 W |
| Voltage (V) | 230 V | — |
| Maximum speed | — | 600 mm/s |
| Category specs | ||
| Footprint X×Y (short side) (mm) | — | 270 mm |
| Build height Z (mm) | — | 256 mm |
| Kinematics | — | CoreXY |
| Max nozzle temperature (°C) | — | 370 °C |
| Max bed temperature (°C) | — | 120 °C |
| Max print speed (mm/s) | — | 600 mm/s |
| Enclosed chamber | — | True |
| Filament sensor | — | True |
| Auto bed leveling | — | Mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Multi-extruder | — | False |
| Native Klipper | — | True |
| Input shaper | — | True |
| Multicolor printing | — | True |
| Multicolor requires accessory | — | True |
| Max colors | — | 16 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with PrusaSlicer (open source, with material profiles verified and maintained by Prusa Research), OrcaSlicer, and SuperSlicer, as well as any slicer that exports standard G-code. The firmware is based on Prusa Research's open-source Marlin fork, with input shaping support. Unlike Bambu Lab models, which use a partially proprietary protocol and work best with Bambu Studio, the CORE One L accepts generic G-code via USB, SD card, and PrusaConnect. The user is not locked into a single software ecosystem and can freely modify or update the firmware. | The system is natively supported by QIDI Studio, a slicing software derived from PrusaSlicer and Orca Slicer, providing a modern interface and advanced features. The open architecture still allows the use of third-party slicing solutions. Network connectivity, via Wi-Fi or Ethernet, facilitates direct remote printing and monitoring, aided by the built-in camera. |
The differences that matter
- Price: XL 1800 € vs Q2 3D Printer 499 € — Q2 3D Printer wins (+261%)
- Work area: XL 300×300 mm vs Q2 3D Printer 270×270 mm — XL wins (+23%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.