Ortur LM3 Laser Engraving & Cutting Machine 20,000mm/min (40W/20W/10W) vs S30 5W Laser Engraver
Technical comparison · Diode laser (405–460 nm)
S30 5W Laser Engraver leads on the measurable specs (starting with price), while Ortur LM3 Laser Engraving & Cutting Machine 20,000mm/min (40W/20W/10W) shows no advantage of its own. Choose S30 5W Laser Engraver, unless non-technical factors (availability, support, ecosystem) tip the balance.
| Parameter |
S30 5W Laser Engraver
Sculpfun
F1 · Entry
|
|
|---|---|---|
| Riconoscimenti | — | |
| Identity | ||
| Launch year | 2023 | 2022 |
| Use tier | F2 — Intermediate | F1 — Entry |
| Price | ||
| Price (€) | ~600–800 € | 299 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 65.8 × 62.5 × 15 cm | 55.5 × 59.5 × 21 cm |
| Work area (mm) | 400 × 380 mm | 410 × 400 mm |
| Power (W) | — | 60 W |
| Voltage (V) | — | 12 V |
| Maximum speed | 20000 mm/min | 6000 mm/min |
| Declared precision | 0.08 mm | 0.005 mm |
| Category specs | ||
| Short side area (mm) | 380.0 mm | 400 mm |
| Nominal laser power (W) | 20.0 W | 5 W |
| Laser source technology | diode | diode |
| Maximum travel speed (mm/s) | — | 100 mm/s |
| Maximum working speed (mm/s) | 333.33 mm/s | 100 mm/s |
| Cut depth per material | 15mm Pine, 10mm Plywood, 8mm Black Acrylic | 5 mm (balsa wood), 3 mm (plywood) |
| Laser wavelength (nm) | — | 455 nm |
| Minimum achievable resolution (µm) | 80.0 µm | 60 µm |
| Autofocus system module | False | False |
| Rotary module included | False | False |
| Passthrough structural slot | — | False |
| Control software interface | proprietary, lightburn, other | lightburn, other |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The LM3 uses firmware based on the open GRBL protocol, compatible with LightBurn (diode license ~$60 one-time), LaserGRBL (free, open-source), and the proprietary Ortur iOS/Android app with selectable novice and advanced modes. LightBurn offers advanced variable power control, path optimization, and optional camera alignment; LaserGRBL covers basic engraving tasks at no additional cost. The open GRBL protocol ensures compatibility with third-party tools and standard G-code generators. Communication is via USB; the Ortur app allows remote job launching via Wi-Fi without a connected PC. | Fully compatible with LightBurn and LaserGRBL via USB connection. The 32-bit motherboard automatically manages the Air Assist activation. |
MakerSpecs Awards
Nessun riconoscimento in questa fascia.
Largest work area Entry
The largest work area among entry-level Diode laser (405–460 nm) machines: 1640 cm².
How we assign awards →The differences that matter
- Price: Ortur LM3 Laser Engraving & Cutting Machine 20,000mm/min (40W/20W/10W) 700 € vs S30 5W Laser Engraver 299 € — S30 5W Laser Engraver wins (+134%)
- Work area: Ortur LM3 Laser Engraving & Cutting Machine 20,000mm/min (40W/20W/10W) 400×380 mm vs S30 5W Laser Engraver 410×400 mm — S30 5W Laser Engraver wins (+8%)
Which one to choose
Choose Ortur LM3 Laser Engraving & Cutting Machine 20,000mm/min (40W/20W/10W) if…
it shows no measurable advantage over S30 5W Laser Engraver on the available specs: consider it on price or availability.
Choose S30 5W Laser Engraver if…
you value price and work area.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.