Ortur LM3 40W vs Sculpfun iCube Pro 5W
Technical comparison · Diode laser (405–460 nm)
LM3 40W and iCube Pro 5W are two diode laser (405–460 nm) in a similar class. Choose LM3 40W if work area matters more; choose iCube Pro 5W if price matters more.
| Parameter |
LM3 40W
Ortur
F2 · Intermediate
|
iCube Pro 5W
Sculpfun
F1 · Entry
|
|---|---|---|
| Identity | ||
| Launch year | 2023 | 2023 |
| Use tier | F2 — Intermediate | F1 — Entry |
| Price | ||
| Price (€) | ~600–800 € | 359.99 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 65.8 × 62.5 × 15 cm | 30 × 26.2 × 22.6 cm |
| Work area (mm) | 400 × 380 mm | 125 × 125 mm |
| Z-axis height (mm) | — | 50 mm |
| Power (W) | — | 60 W |
| Voltage (V) | — | 240 V |
| Maximum speed | 20000 mm/min | 10000 mm/min |
| Declared precision | 0.08 mm | — |
| Category specs | ||
| Work area (short side) (mm) | 380.0 mm | 125 mm |
| Rated power (W) | 20.0 W | 5 W |
| Source technology | Diode | Diode |
| Max travel speed (mm/s) | — | 166.67 mm/s |
| Max processing speed (mm/s) | 333.33 mm/s | 166.67 mm/s |
| Max cut depth per material | 15mm Pine, 10mm Plywood, 8mm Black Acrylic | 10 mm (soft board/cardboard), 6 mm (acrylic) |
| Wavelength (nm) | — | 455 nm |
| Min resolution (µm) | 80.0 µm | — |
| Autofocus | False | False |
| Rotary included/compatible | False | False |
| Passthrough | — | False |
| Supported software | Proprietary, LightBurn, Other | LightBurn, Proprietary, Other |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The LM3 uses firmware based on the open GRBL protocol, compatible with LightBurn (diode license ~$60 one-time), LaserGRBL (free, open-source), and the proprietary Ortur iOS/Android app with selectable novice and advanced modes. LightBurn offers advanced variable power control, path optimization, and optional camera alignment; LaserGRBL covers basic engraving tasks at no additional cost. The open GRBL protocol ensures compatibility with third-party tools and standard G-code generators. Communication is via USB; the Ortur app allows remote job launching via Wi-Fi without a connected PC. | It supports mobile connection via the proprietary Sculpfun app and wired connection to a PC for use with LightBurn and LaserGRBL. Compatible with major desktop and mobile operating systems. |
The differences that matter
- Work area: LM3 40W 400×380 mm vs iCube Pro 5W 125×125 mm — LM3 40W wins (+873%)
- Price: LM3 40W 700 € vs iCube Pro 5W 359.99 € — iCube Pro 5W wins (+94%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.