Ortur UFERO 2 10W vs xTool D1 Pro 10W Laser Engraver
Technical comparison · Diode laser (405–460 nm)
UFERO 2 10W and D1 Pro 10W Laser Engraver are two diode laser (405–460 nm) in a similar class. Choose UFERO 2 10W if price matters more; choose D1 Pro 10W Laser Engraver if work area matters more.
| Parameter |
UFERO 2 10W
Ortur
F2 · Intermediate
|
D1 Pro 10W Laser Engraver
xTool
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2021 | 2022 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~220–320 € | ~500–700 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 60 × 59 × 15 cm |
| Weight (kg) | — | 5 kg |
| Work area (mm) | 390 × 390 mm | 430 × 390 mm |
| Power (W) | — | 100 W |
| Maximum speed | 10000 mm/min | 400 mm/s |
| Declared precision | 0.01 mm | 0.01 mm |
| Category specs | ||
| Work area (short side) (mm) | — | 390 mm |
| Rated power (W) | 10.0 W | 10 W |
| Source technology | — | Diode |
| Max travel speed (mm/s) | 166.67 mm/s | 400 mm/s |
| Max processing speed (mm/s) | — | 400 mm/s |
| Max cut depth per material | 8mm pine board, 5mm Acrylic | 6 mm basswood |
| Wavelength (nm) | — | 455 nm |
| Min resolution (µm) | 10.0 µm | 80 µm |
| Autofocus | False | False |
| Rotary included/compatible | — | False |
| Passthrough | — | False |
| Supported software | — | Proprietary, LightBurn |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Controlled by open GRBL firmware, it is compatible with LightBurn (paid, Windows/macOS/Linux) and LaserGRBL (free, Windows). The standard protocol is independent of proprietary software and allows the use of any GCode client. File transfer is via USB or microSD card, without cloud dependency. | Operational management is flexible, adapting to various workflows through dual software compatibility. The manufacturer provides xTool Creative Space, a free, proprietary application that is intuitive and beginner-friendly, supporting connectivity via Wi-Fi, USB cable, or TF card for offline operation. For experienced users requiring advanced vector editing capabilities and precise control over scanning parameters, the machine fully supports LightBurn. The latter requires a separate license purchase and initial setup via dedicated configuration files, but it unlocks the hardware's full potential for optimizing execution times and managing complex multi-layer projects. |
The differences that matter
- Price: UFERO 2 10W 270 € vs D1 Pro 10W Laser Engraver 600 € — UFERO 2 10W wins (+122%)
- Work area: UFERO 2 10W 390×390 mm vs D1 Pro 10W Laser Engraver 430×390 mm — D1 Pro 10W Laser Engraver wins (+10%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.