UFERO 2 10W vs S30 Pro 10W Laser Engraver
Technical comparison · Diode laser (405–460 nm)
UFERO 2 10W and S30 Pro 10W Laser Engraver are two diode laser (405–460 nm) in a similar class. Choose UFERO 2 10W if price matters more; choose S30 Pro 10W Laser Engraver if price matters more.
| Parameter |
UFERO 2 10W
Ortur
F2 · Intermediate
|
S30 Pro 10W Laser Engraver
Sculpfun
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2021 | 2022 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~220–320 € | 599.99 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 55.5 × 59.5 × 21 cm |
| Work area (mm) | 390 × 390 mm | 385 × 380 mm |
| Power (W) | — | 84 W |
| Voltage (V) | — | 12 V |
| Maximum speed | 10000 mm/min | 25000 mm/min |
| Declared precision | 0.01 mm | 0.005 mm |
| Category specs | ||
| Short side area (mm) | — | 380 mm |
| Nominal laser power (W) | 10.0 W | 10 W |
| Laser source technology | — | diode |
| Maximum travel speed (mm/s) | 166.67 mm/s | — |
| Cut depth per material | 8mm pine board, 5mm Acrylic | — |
| Laser wavelength (nm) | — | 455 nm |
| Minimum achievable resolution (µm) | 10.0 µm | — |
| Autofocus system module | False | False |
| Rotary module included | — | False |
| Passthrough structural slot | — | False |
| Control software interface | — | lightburn, other |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Controlled by open GRBL firmware, it is compatible with LightBurn (paid, Windows/macOS/Linux) and LaserGRBL (free, Windows). The standard protocol is independent of proprietary software and allows the use of any GCode client. File transfer is via USB or microSD card, without cloud dependency. | Fully compatible with LightBurn and LaserGRBL for Windows and macOS systems. The 32-bit motherboard can automatically manage the Air Assist activation. |
The differences that matter
- Price: UFERO 2 10W 270 € vs S30 Pro 10W Laser Engraver 599.99 € — UFERO 2 10W wins (+122%)
- Work area: UFERO 2 10W 390×390 mm vs S30 Pro 10W Laser Engraver 385×380 mm — UFERO 2 10W wins (+4%)
Which one to choose
Choose S30 Pro 10W Laser Engraver if…
it shows no measurable advantage over UFERO 2 10W on the available specs: consider it on price or availability.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.