UFERO 2 10W vs S30 5W Laser Engraver
Technical comparison · Diode laser (405–460 nm)
UFERO 2 10W and S30 5W Laser Engraver are two diode laser (405–460 nm) in a similar class. Choose UFERO 2 10W if price matters more; choose S30 5W Laser Engraver if work area matters more.
| Parameter |
UFERO 2 10W
Ortur
F2 · Intermediate
|
S30 5W Laser Engraver
Sculpfun
F1 · Entry
|
|---|---|---|
| Riconoscimenti | — | |
| Identity | ||
| Launch year | 2021 | 2022 |
| Use tier | F2 — Intermediate | F1 — Entry |
| Price | ||
| Price (€) | ~220–320 € | 299 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 55.5 × 59.5 × 21 cm |
| Work area (mm) | 390 × 390 mm | 410 × 400 mm |
| Power (W) | — | 60 W |
| Voltage (V) | — | 12 V |
| Maximum speed | 10000 mm/min | 6000 mm/min |
| Declared precision | 0.01 mm | 0.005 mm |
| Category specs | ||
| Short side area (mm) | — | 400 mm |
| Nominal laser power (W) | 10.0 W | 5 W |
| Laser source technology | — | diode |
| Maximum travel speed (mm/s) | 166.67 mm/s | 100 mm/s |
| Maximum working speed (mm/s) | — | 100 mm/s |
| Cut depth per material | 8mm pine board, 5mm Acrylic | 5 mm (balsa wood), 3 mm (plywood) |
| Laser wavelength (nm) | — | 455 nm |
| Minimum achievable resolution (µm) | 10.0 µm | 60 µm |
| Autofocus system module | False | False |
| Rotary module included | — | False |
| Passthrough structural slot | — | False |
| Control software interface | — | lightburn, other |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Controlled by open GRBL firmware, it is compatible with LightBurn (paid, Windows/macOS/Linux) and LaserGRBL (free, Windows). The standard protocol is independent of proprietary software and allows the use of any GCode client. File transfer is via USB or microSD card, without cloud dependency. | Fully compatible with LightBurn and LaserGRBL via USB connection. The 32-bit motherboard automatically manages the Air Assist activation. |
MakerSpecs Awards
UFERO 2 10W
Nessun riconoscimento in questa fascia.
S30 5W Laser Engraver
Largest work area Entry
The largest work area among entry-level Diode laser (405–460 nm) machines: 1640 cm².
How we assign awards →The differences that matter
- Price: UFERO 2 10W 270 € vs S30 5W Laser Engraver 299 € — UFERO 2 10W wins (+11%)
- Work area: UFERO 2 10W 390×390 mm vs S30 5W Laser Engraver 410×400 mm — S30 5W Laser Engraver wins (+8%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.