Creality Ender-3 V3 SE vs Creality Hi Combo
Technical comparison · Fused filament fabrication (FFF/FDM)
Ender-3 V3 SE and Hi Combo are two fused filament fabrication (fff/fdm) in a similar class. Choose Ender-3 V3 SE if price matters more; choose Hi Combo if max print speed and max colors matters more. On the category's overall technical index, Hi Combo scores 39/100 against 10/100 for Ender-3 V3 SE.
| Parameter |
Ender-3 V3 SE
Creality
F2 · Intermediate
|
Hi Combo
Creality
F2 · Intermediate
|
|---|---|---|
| Awards | — | |
| Identity | ||
| Launch year | 2023 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~150–200 € | 349 € |
| Price updated on | 06/2026 | 06/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 42 × 36.6 × 49 cm | 40.9 × 39.2 × 47.7 cm |
| Weight (kg) | 7.34 kg | 13.31 kg |
| Work area (mm) | 220 × 220 mm | 260 × 260 mm |
| Z-axis height (mm) | 250 mm | 300 mm |
| Power (W) | 350 W | 1150 W |
| Voltage (V) | 220 V | 220 V |
| Maximum speed | 250 mm/s | 500 mm/s |
| Declared precision | 0.1 ±mm | 0.1 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 220 mm | 260 mm |
| Build height Z (mm) | 250 mm | 300 mm |
| Kinematics | Cartesian | Cartesian |
| Max nozzle temperature (°C) | 260 °C | 300 °C |
| Max bed temperature (°C) | 100 °C | 100 °C |
| Max print speed (mm/s) | 250 mm/s | 500 mm/s |
| Enclosed chamber | False | false |
| Filament sensor | False | true |
| Auto bed leveling | Mesh | Mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | False | false |
| Native Klipper | False | false |
| Input shaper | False | true |
| Multicolor printing | False | true |
| Multicolor requires accessory | — | false |
| Max colors | 1 | 4 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The printer runs Creality's proprietary Marlin-based firmware. It is compatible with Creality Print and Cura 5.0 or later; Simplify3D support is documented by third-party resellers. Print files are transferred via SD card. Community guides exist for converting to Klipper, but this is not an officially supported configuration and requires manual hardware and firmware intervention. | Runs Creality OS, a Klipper-derived firmware, with input shaper and pressure advance pre-configured. The primary slicer is Creality Print (free), also compatible with Orca Slicer. Remote monitoring via Creality Cloud is available but not required for local use. |
MakerSpecs Awards
Ender-3 V3 SE
Best price Intermediate
The lowest list price among intermediate Fused filament fabrication (FFF/FDM) machines: €175. The second cheapest starts at €229. (Excluding manufacturer or retailer discounts.)
How we assign awards →Hi Combo
Nessun riconoscimento in questa fascia.
The differences that matter
- Price: Ender-3 V3 SE 175 € vs Hi Combo 349 € — Ender-3 V3 SE wins (+99%)
- Max print speed: Ender-3 V3 SE 250 mm/s vs Hi Combo 500 mm/s — Hi Combo wins (+100%)
- Max colors: Ender-3 V3 SE 1 vs Hi Combo 4 — Hi Combo wins (+300%)
- Work area: Ender-3 V3 SE 220×220 mm vs Hi Combo 260×260 mm — Hi Combo wins (+40%)
- Filament sensor: Hi Combo yes, Ender-3 V3 SE no
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.