X1E vs Hi Combo
Technical comparison · Fused filament fabrication (FFF/FDM)
| Parameter |
X1E
Bambu Lab
F3 · Advanced
|
Hi Combo
Creality
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2023 | 2025 |
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price (€) | ~2400–2700 € | 349 € |
| Price updated on | — | 06/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 38.9 × 38.9 × 45.7 cm | 40.9 × 39.2 × 47.7 cm |
| Weight (kg) | 16 kg | 13.31 kg |
| Work area (mm) | 256 × 256 mm | 260 × 260 mm |
| Z-axis height (mm) | 256 mm | 300 mm |
| Power (W) | 1350 W | 1150 W |
| Voltage (V) | 100 V | 220 V |
| Maximum speed | 500 mm/s | 500 mm/s |
| Declared precision | 7 μm | 0.1 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 256 mm | 260 mm |
| Build height Z (mm) | 256 mm | 300 mm |
| Kinematics | corexy | cartesian |
| Max nozzle temperature (°C) | 320 °C | 300 °C |
| Max bed temperature (°C) | 120 °C | 100 °C |
| Max print speed (mm/s) | 500 mm/s | 500 mm/s |
| Enclosed chamber | True | false |
| Filament sensor | True | true |
| Auto bed leveling | mesh | mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | False | false |
| Native Klipper | False | false |
| Input shaper | True | true |
| Multicolor printing | True | true |
| Multicolor requires accessory | True | false |
| Max colors | 16 | 4 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The X1E works with Bambu Studio, Bambu Lab's proprietary slicer, which handles slicing, automatic calibration, and remote monitoring via the Bambu Handy app. Orca Slicer, an open-source Bambu Studio fork with dedicated profiles, is also supported. The firmware is proprietary; Klipper is not natively supported. The printer can run in LAN-only mode, operating fully without an internet connection through the local network. | Runs Creality OS, a Klipper-derived firmware, with input shaper and pressure advance pre-configured. The primary slicer is Creality Print (free), also compatible with Orca Slicer. Remote monitoring via Creality Cloud is available but not required for local use. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.