X1E vs Ender-3 V3 SE
Technical comparison · Fused filament fabrication (FFF/FDM)
| Parameter |
X1E
Bambu Lab
F3 · Advanced
|
Ender-3 V3 SE
Creality
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2023 | 2023 |
| Use tier | F3 — Advanced | F2 — Intermediate |
| Price | ||
| Price (€) | ~2400–2700 € | ~150–200 € |
| Price updated on | — | 06/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 38.9 × 38.9 × 45.7 cm | 42 × 36.6 × 49 cm |
| Weight (kg) | 16 kg | 7.34 kg |
| Work area (mm) | 256 × 256 mm | 220 × 220 mm |
| Z-axis height (mm) | 256 mm | 250 mm |
| Power (W) | 1350 W | 350 W |
| Voltage (V) | 100 V | 220 V |
| Maximum speed | 500 mm/s | 250 mm/s |
| Declared precision | 7 μm | 0.1 ±mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 256 mm | 220 mm |
| Build height Z (mm) | 256 mm | 250 mm |
| Kinematics | corexy | cartesian |
| Max nozzle temperature (°C) | 320 °C | 260 °C |
| Max bed temperature (°C) | 120 °C | 100 °C |
| Max print speed (mm/s) | 500 mm/s | 250 mm/s |
| Enclosed chamber | True | False |
| Filament sensor | True | False |
| Auto bed leveling | mesh | mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | False | False |
| Native Klipper | False | False |
| Input shaper | True | False |
| Multicolor printing | True | False |
| Multicolor requires accessory | True | — |
| Max colors | 16 | 1 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The X1E works with Bambu Studio, Bambu Lab's proprietary slicer, which handles slicing, automatic calibration, and remote monitoring via the Bambu Handy app. Orca Slicer, an open-source Bambu Studio fork with dedicated profiles, is also supported. The firmware is proprietary; Klipper is not natively supported. The printer can run in LAN-only mode, operating fully without an internet connection through the local network. | The printer runs Creality's proprietary Marlin-based firmware. It is compatible with Creality Print and Cura 5.0 or later; Simplify3D support is documented by third-party resellers. Print files are transferred via SD card. Community guides exist for converting to Klipper, but this is not an officially supported configuration and requires manual hardware and firmware intervention. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.