H2S vs Ender-3 V3 SE
Technical comparison · Fused filament fabrication (FFF/FDM)
| Parameter |
H2S
Bambu Lab
F2 · Intermediate
|
Ender-3 V3 SE
Creality
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2025 | 2023 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~1150–1250 € | ~150–200 € |
| Price updated on | — | 06/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 49.2 × 51.4 × 62.6 cm | 42 × 36.6 × 49 cm |
| Weight (kg) | 30 kg | 7.34 kg |
| Work area (mm) | 340 × 320 mm | 220 × 220 mm |
| Z-axis height (mm) | 340 mm | 250 mm |
| Power (W) | 1800 W | 350 W |
| Voltage (V) | 220 V | 220 V |
| Maximum speed | 1000 mm/s | 250 mm/s |
| Declared precision | 50 μm | 0.1 ±mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 320 mm | 220 mm |
| Build height Z (mm) | 340 mm | 250 mm |
| Kinematics | corexy | cartesian |
| Max nozzle temperature (°C) | 350 °C | 260 °C |
| Max bed temperature (°C) | 120 °C | 100 °C |
| Max print speed (mm/s) | 1000 mm/s | 250 mm/s |
| Enclosed chamber | True | False |
| Filament sensor | True | False |
| Auto bed leveling | mesh | mesh |
| Standard nozzle diameter (mm) | 0.4 mm | 0.4 mm |
| Multi-extruder | False | False |
| Native Klipper | False | False |
| Input shaper | True | False |
| Multicolor printing | True | False |
| Multicolor requires accessory | True | — |
| Max colors | — | 1 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The H2S uses Bambu Studio as its primary slicer, with full support for proprietary features including automatic calibration, AI monitoring, and AMS management. It also accepts G-code exported from OrcaSlicer, PrusaSlicer, and Cura, though some advanced functions may not be available with third-party slicers. Laser and cutting functions are managed exclusively through Bambu Suite. Developer Mode is available, exposing MQTT access for custom integrations. | The printer runs Creality's proprietary Marlin-based firmware. It is compatible with Creality Print and Cura 5.0 or later; Simplify3D support is documented by third-party resellers. Print files are transferred via SD card. Community guides exist for converting to Klipper, but this is not an officially supported configuration and requires manual hardware and firmware intervention. |
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.