Atomstack Kraft Dual Laser Engraver vs Atomstack Kraft Lite 40W
Technical comparison · Diode laser (405–460 nm)
Kraft Dual Laser Engraver leads on the available specs (starting with price); Kraft Lite 40W makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
Kraft Dual Laser Engraver
Atomstack
F2 · Intermediate
|
Kraft Lite 40W
Atomstack
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2025 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~1200–1700 € | 2335 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 79.1 × 61 × 26.15 cm | — |
| Weight (kg) | 23.6 kg | 23.6 kg |
| Work area (mm) | 500 × 320 mm | 500 × 320 mm |
| Power (W) | 216 W | — |
| Voltage (V) | 24 V | — |
| Maximum speed | 600 mm/s | — |
| Category specs | ||
| Work area (short side) (mm) | 320 mm | 320.0 mm |
| Rated power (W) | 20 W | 20.0 W |
| Source technology | Diode | Diode |
| Max travel speed (mm/s) | 600 mm/s | — |
| Max processing speed (mm/s) | 600 mm/s | — |
| Max cut depth per material | Wood: 18mm, Acrylic: 5mm, Leather: 5mm | wood: 18mm, acrylic: 5mm, leather: 5mm, metal: 0.01mm, stone: 0.01mm |
| Wavelength (nm) | 450 nm | — |
| Min resolution (µm) | 30 µm | — |
| Autofocus | True | True |
| Passthrough | — | True |
| Supported software | LightBurn, Proprietary | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The system is fully compatible with LightBurn, the industry standard for laser control, which allows users to easily manage the dual laser source for processing different materials without changing the head. For users looking for a plug-and-play solution, the proprietary AtomStack Studio software is available, compatible with Windows, macOS, and even mobile devices. The latter simplifies the use of the built-in 16 MP camera, optimizing the workspace preview for quick and precise positioning, thus reducing material waste. The machine supports job resume in case of power failure and can operate offline via a USB flash drive, ensuring an uninterrupted workflow even without a continuous connection to a computer. | Compatible with LightBurn, LaserGRBL, and any software that outputs G-code to a GRBL controller. The board uses open GRBL firmware, allowing for customizable engraving parameters without locking you into proprietary software. LightBurn requires a separate license (about €99). |
The differences that matter
- Price: Kraft Dual Laser Engraver 1450 € vs Kraft Lite 40W 2335 € — Kraft Dual Laser Engraver wins (+61%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.