AtomStack Kraft Lite 40W vs Sculpfun S30 10W
Technical comparison · Diode laser (405–460 nm)
AtomStack Kraft Lite 40W and Sculpfun S30 10W are not direct competitors: very different prices (~3.9×). Sculpfun S30 10W costs less (~€599.99) and is the entry-level choice; AtomStack Kraft Lite 40W offers more capability at a higher price (~€2335). Judge them by budget, not head-to-head.
| Parameter |
AtomStack Kraft Lite 40W
Atomstack
F2 · Intermediate
|
Sculpfun S30 10W
Sculpfun
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2025 | 2022 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | 2335 € | 599.99 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 55.5 × 59.5 × 21 cm |
| Weight (kg) | 23.6 kg | — |
| Work area (mm) | 500 × 320 mm | 380 × 385 mm |
| Power (W) | — | 84 W |
| Voltage (V) | — | 240 V |
| Maximum speed | — | 25000 mm/min |
| Declared precision | — | 0.005 mm |
| Category specs | ||
| Short side area (mm) | 320.0 mm | 380 mm |
| Nominal laser power (W) | 20.0 W | 10 W |
| Laser source technology | diode | diode |
| Cut depth per material | wood: 18mm, acrylic: 5mm, leather: 5mm, metal: 0.01mm, stone: 0.01mm | — |
| Laser wavelength (nm) | — | 455 nm |
| Minimum achievable resolution (µm) | — | 5 µm |
| Autofocus system module | True | False |
| Rotary module included | — | False |
| Passthrough structural slot | True | — |
| Control software interface | — | lightburn, other |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with LightBurn, LaserGRBL, and any software that outputs G-code to a GRBL controller. The board uses open GRBL firmware, allowing for customizable engraving parameters without locking you into proprietary software. LightBurn requires a separate license (about €99). | The 32-bit motherboard is fully compatible with LightBurn (including M8 air control) and LaserGRBL. It also supports Bluetooth connectivity and offline printing via SD card. |
The differences that matter
- Price: AtomStack Kraft Lite 40W 2335 € vs Sculpfun S30 10W 599.99 € — Sculpfun S30 10W wins (+289%)
- Work area: AtomStack Kraft Lite 40W 500×320 mm vs Sculpfun S30 10W 380×385 mm — AtomStack Kraft Lite 40W wins (+9%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.