A20 Pro V2 Laser Engraver vs Sculpfun S10
Technical comparison · Diode laser (405–460 nm)
Sculpfun S10 leads on the measurable specs (starting with work area), while A20 Pro V2 Laser Engraver shows no advantage of its own. Choose Sculpfun S10, unless non-technical factors (availability, support, ecosystem) tip the balance.
| Parameter |
A20 Pro V2 Laser Engraver
Atomstack
F2 · Intermediate
|
Sculpfun S10
Sculpfun
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2024 | 2022 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~300–600 € | 469.99 € |
| Universal specs | ||
| Weight (kg) | 6 kg | 3.42 kg |
| Work area (mm) | 400 × 365 mm | 410 × 400 mm |
| Power (W) | 120 W | 36 W |
| Maximum speed | 400 mm/s | — |
| Declared precision | 0.02 mm | 0.01 mm |
| Category specs | ||
| Short side area (mm) | 365 mm | 400 mm |
| Nominal laser power (W) | 20 W | 10 W |
| Laser source technology | diode | diode |
| Maximum travel speed (mm/s) | 400 mm/s | — |
| Maximum working speed (mm/s) | 400 mm/s | — |
| Laser wavelength (nm) | 455 nm | 455 nm |
| Minimum achievable resolution (µm) | — | 10 µm |
| Autofocus system module | False | False |
| Rotary module included | False | False |
| Passthrough structural slot | False | False |
| Control software interface | proprietary, lightburn, other | lightburn, other |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The software compatibility of the device is extensive and aligns with the industrial standards of the maker sector. It natively supports both LaserGRBL, a free and open-source option suitable for basic engraving operations, and LightBurn, the most popular paid professional platform for advanced management of layers, cutting parameters, and complex vector formats. Control can be managed directly via a wired USB connection from a computer or in offline mode, using memory cards to load processing files. The machine responds to standard G-code commands, allowing experienced users fine customization of acceleration and speed parameters through the configuration of the internal firmware, without constraints linked to proprietary and closed-source cloud ecosystems. | Compatible with major engraving software such as LightBurn and LaserGRBL. It connects via USB port and does not support offline use with SD memory cards. |
The differences that matter
- Work area: A20 Pro V2 Laser Engraver 400×365 mm vs Sculpfun S10 410×400 mm — Sculpfun S10 wins (+12%)
Which one to choose
Choose A20 Pro V2 Laser Engraver if…
it shows no measurable advantage over Sculpfun S10 on the available specs: consider it on price or availability.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.