Sidewinder SW-X2 3D Printer vs X-Smart 3
Technical comparison · Fused filament fabrication (FFF/FDM)
Sidewinder SW-X2 3D Printer leads on the measurable specs (starting with work area), while X-Smart 3 shows no advantage of its own. Choose Sidewinder SW-X2 3D Printer, unless non-technical factors (availability, support, ecosystem) tip the balance.
| Parameter |
Sidewinder SW-X2 3D Printer
Artillery
F2 · Intermediate
|
X-Smart 3
Qidi Tech
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2021 | 2023 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~250–320 € | ~350–450 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 37 × 36.2 × 39.7 cm |
| Weight (kg) | — | 10.5 kg |
| Work area (mm) | 300 × 300 mm | 175 × 180 mm |
| Z-axis height (mm) | 400 mm | 170 mm |
| Power (W) | — | 350 W |
| Maximum speed | — | 500 mm/s |
| Declared precision | — | 0.1 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | — | 175 mm |
| Build height Z (mm) | — | 170 mm |
| Kinematics | — | CoreXY |
| Max nozzle temperature (°C) | — | 300 °C |
| Max bed temperature (°C) | — | 120 °C |
| Max print speed (mm/s) | — | 500 mm/s |
| Enclosed chamber | — | True |
| Filament sensor | — | True |
| Auto bed leveling | — | Mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Multi-extruder | — | False |
| Native Klipper | — | True |
| Input shaper | — | True |
| Multicolor printing | — | False |
| Multicolor requires accessory | — | False |
| Max colors | — | 1 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with any slicer that generates standard G-code, such as Cura, PrusaSlicer, Simplify3D, IdeaMaker. The machine uses open-source Marlin 2.0 firmware with no proprietary locks. The communication protocol is standard USB serial, not GRBL, with profiles widely documented by the community. | The QIDI X-Smart 3 is primarily managed via QIDI Slicer, a proprietary software based on the latest versions of PrusaSlicer, optimized to fully leverage the machine's high speeds and CoreXY structure. The interface offers both a beginner mode and an advanced mode for granular control of parameters. The printer comes with pre-installed Klipper firmware, allowing advanced users direct access to the Fluidd web interface for real-time monitoring, calibration, and macro customization. Nevertheless, compatibility is guaranteed with the most popular third-party slicing software, including Ultimaker Cura, Simplify3D, and standard PrusaSlicer, ensuring a flexible and adaptable workflow. |
The differences that matter
- Work area: Sidewinder SW-X2 3D Printer 300×300 mm vs X-Smart 3 175×180 mm — Sidewinder SW-X2 3D Printer wins (+186%)
- Price: Sidewinder SW-X2 3D Printer 285 € vs X-Smart 3 400 € — Sidewinder SW-X2 3D Printer wins (+40%)
Which one to choose
Choose Sidewinder SW-X2 3D Printer if…
you value work area and price.
Choose X-Smart 3 if…
it shows no measurable advantage over Sidewinder SW-X2 3D Printer on the available specs: consider it on price or availability.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.