Artillery Sidewinder SW-X2 3D Printer vs Prusa Research XL Single-toolhead 3D Printer - Enclosure Bundle
Technical comparison · Fused filament fabrication (FFF/FDM)
Sidewinder SW-X2 3D Printer and XL Single-toolhead 3D Printer - Enclosure Bundle are not direct competitors: very different prices (~10.1×). Sidewinder SW-X2 3D Printer costs less (~€285) and is the entry-level choice; XL Single-toolhead 3D Printer - Enclosure Bundle offers more capability at a higher price (~€2879). Judge them by budget, not head-to-head.
| Parameter |
Sidewinder SW-X2 3D Printer
Artillery
F2 · Intermediate
|
XL Single-toolhead 3D Printer - Enclosure Bundle
Prusa Research
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2021 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~250–320 € | 2879 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 70 × 90 × 72 cm |
| Work area (mm) | 300 × 300 mm | 360 × 360 mm |
| Z-axis height (mm) | 400 mm | 360 mm |
| Voltage (V) | — | 230 V |
| Maximum speed | — | 400 mm/s |
| Declared precision | — | 0.2 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | — | 360 mm |
| Build height Z (mm) | — | 360 mm |
| Kinematics | — | CoreXY |
| Max nozzle temperature (°C) | — | 290 °C |
| Max bed temperature (°C) | — | 120 °C |
| Max print speed (mm/s) | — | 400 mm/s |
| Enclosed chamber | — | True |
| Filament sensor | — | True |
| Auto bed leveling | — | Mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Multi-extruder | — | False |
| Native Klipper | — | False |
| Input shaper | — | True |
| Multicolor printing | — | False |
| Multicolor requires accessory | — | True |
| Max colors | — | 1 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with any slicer that generates standard G-code, such as Cura, PrusaSlicer, Simplify3D, IdeaMaker. The machine uses open-source Marlin 2.0 firmware with no proprietary locks. The communication protocol is standard USB serial, not GRBL, with profiles widely documented by the community. | The firmware is based on Marlin with strong Klipper influence and integrates Input Shaper and Pressure Advance to handle higher speeds. Files are prepared with PrusaSlicer; operation does not require a cloud connection. |
The differences that matter
- Price: Sidewinder SW-X2 3D Printer 285 € vs XL Single-toolhead 3D Printer - Enclosure Bundle 2879 € — Sidewinder SW-X2 3D Printer wins (+910%)
- Work area: Sidewinder SW-X2 3D Printer 300×300 mm vs XL Single-toolhead 3D Printer - Enclosure Bundle 360×360 mm — XL Single-toolhead 3D Printer - Enclosure Bundle wins (+44%)
Which one to choose
Choose XL Single-toolhead 3D Printer - Enclosure Bundle if…
you value work area.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.