Artillery Sidewinder SW-X2 3D Printer vs Sidewinder X3 Plus
Technical comparison · Fused filament fabrication (FFF/FDM)
Artillery Sidewinder SW-X2 3D Printer and Sidewinder X3 Plus are two fused filament fabrication (fff/fdm) in a similar class. Choose Artillery Sidewinder SW-X2 3D Printer if price matters more; choose Sidewinder X3 Plus if price matters more.
| Parameter |
Artillery Sidewinder SW-X2 3D Printer
Artillery
F2 · Intermediate
|
Sidewinder X3 Plus
Artillery
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2021 | 2023 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~250–320 € | ~280–360 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | — | 49.2 × 50.7 × 61 cm |
| Weight (kg) | — | 16.6 kg |
| Work area (mm) | 300 × 300 mm | 300 × 300 mm |
| Z-axis height (mm) | 400 mm | 400 mm |
| Maximum speed | — | 300 mm/s |
| Category specs | ||
| XY print surface (mm) | — | 300.0 mm |
| Maximum Z height (mm) | — | 400.0 mm |
| Kinematics | — | cartesian |
| Max nozzle temperature (°C) | — | 300.0 °C |
| Max bed temperature (°C) | — | 100.0 °C |
| Max print speed (mm/s) | — | 300.0 mm/s |
| Auto leveling | — | mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Compatible with any slicer that generates standard G-code, such as Cura, PrusaSlicer, Simplify3D, IdeaMaker. The machine uses open-source Marlin 2.0 firmware with no proprietary locks. The communication protocol is standard USB serial, not GRBL, with profiles widely documented by the community. | The STM32 board runs Marlin and communicates via USB Type-C or TF card; it works with any standard slicer (Cura, PrusaSlicer, Simplify3D) without proprietary restrictions. Lack of Wi-Fi requires physical transfer of G-code files, but ensures full offline control. |
The differences that matter
- Price: Artillery Sidewinder SW-X2 3D Printer 285 € vs Sidewinder X3 Plus 320 € — Artillery Sidewinder SW-X2 3D Printer wins (+12%)
Which one to choose
Choose Artillery Sidewinder SW-X2 3D Printer if…
you value price.
Choose Sidewinder X3 Plus if…
it shows no measurable advantage over Artillery Sidewinder SW-X2 3D Printer on the available specs: consider it on price or availability.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.