Artillery M1 Pro S1 vs Creality Hi Combo
Technical comparison · Fused filament fabrication (FFF/FDM)
M1 Pro S1 and Hi Combo are two fused filament fabrication (fff/fdm) in a similar class. Choose M1 Pro S1 if enclosed chamber matters more; choose Hi Combo if multicolor requires accessory and build height z matters more.
| Parameter |
M1 Pro S1
Artillery
F2 · Intermediate
|
Hi Combo
Creality
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2026 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~295–350 € | 349 € |
| Price updated on | — | 06/2026 |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 43.7 × 38.9 × 49.4 cm | 40.9 × 39.2 × 47.7 cm |
| Weight (kg) | — | 13.31 kg |
| Work area (mm) | 260 × 260 mm | 260 × 260 mm |
| Z-axis height (mm) | 260 mm | 300 mm |
| Power (W) | 150 W | 1150 W |
| Voltage (V) | — | 220 V |
| Maximum speed | 600 mm/s | 500 mm/s |
| Declared precision | 0.1 mm | 0.1 mm |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 260 mm | 260 mm |
| Build height Z (mm) | 260 mm | 300 mm |
| Kinematics | CoreXY | Cartesian |
| Max nozzle temperature (°C) | — | 300 °C |
| Max bed temperature (°C) | 120 °C | 100 °C |
| Max print speed (mm/s) | 600 mm/s | 500 mm/s |
| Enclosed chamber | True | false |
| Filament sensor | — | true |
| Auto bed leveling | — | Mesh |
| Standard nozzle diameter (mm) | — | 0.4 mm |
| Multi-extruder | False | false |
| Native Klipper | False | false |
| Input shaper | — | true |
| Multicolor printing | True | true |
| Multicolor requires accessory | True | false |
| Max colors | — | 4 |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Artillery OS, a Klipper-based system. Compatible with standard slicers like Cura, PrusaSlicer and OrcaSlicer via G-code. Supports Wi-Fi transfer, SD card and touchscreen control. Compared to closed platforms, it allows advanced adjustment of printing parameters, but lacks a native cloud ecosystem and requires manual slicer configuration. | Runs Creality OS, a Klipper-derived firmware, with input shaper and pressure advance pre-configured. The primary slicer is Creality Print (free), also compatible with Orca Slicer. Remote monitoring via Creality Cloud is available but not required for local use. |
The differences that matter
- Enclosed chamber: M1 Pro S1 yes, Hi Combo no
- Multicolor requires accessory: M1 Pro S1 yes, Hi Combo no
- Max print speed: M1 Pro S1 600 mm/s vs Hi Combo 500 mm/s — M1 Pro S1 wins (+20%)
- Build height Z: M1 Pro S1 260 mm vs Hi Combo 300 mm — Hi Combo wins (+15%)
- Price: M1 Pro S1 322.5 € vs Hi Combo 349 € — M1 Pro S1 wins (+8%)
Which one to choose
Choose M1 Pro S1 if…
you value enclosed chamber, max print speed and price.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.