Artillery M1 Pro S1 vs Artillery Sidewinder SW-X2 3D Printer
Technical comparison · Fused filament fabrication (FFF/FDM)
Sidewinder SW-X2 3D Printer leads on the available specs (starting with work area); M1 Pro S1 makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
M1 Pro S1
Artillery
F2 · Intermediate
|
Sidewinder SW-X2 3D Printer
Artillery
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2026 | 2021 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~295–350 € | ~250–320 € |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 43.7 × 38.9 × 49.4 cm | — |
| Work area (mm) | 260 × 260 mm | 300 × 300 mm |
| Z-axis height (mm) | 260 mm | 400 mm |
| Power (W) | 150 W | — |
| Maximum speed | 600 mm/s | — |
| Declared precision | 0.1 mm | — |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 260 mm | — |
| Build height Z (mm) | 260 mm | — |
| Kinematics | CoreXY | — |
| Max bed temperature (°C) | 120 °C | — |
| Max print speed (mm/s) | 600 mm/s | — |
| Enclosed chamber | True | — |
| Multi-extruder | False | — |
| Native Klipper | False | — |
| Multicolor printing | True | — |
| Multicolor requires accessory | True | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | Artillery OS, a Klipper-based system. Compatible with standard slicers like Cura, PrusaSlicer and OrcaSlicer via G-code. Supports Wi-Fi transfer, SD card and touchscreen control. Compared to closed platforms, it allows advanced adjustment of printing parameters, but lacks a native cloud ecosystem and requires manual slicer configuration. | Compatible with any slicer that generates standard G-code, such as Cura, PrusaSlicer, Simplify3D, IdeaMaker. The machine uses open-source Marlin 2.0 firmware with no proprietary locks. The communication protocol is standard USB serial, not GRBL, with profiles widely documented by the community. |
The differences that matter
- Work area: M1 Pro S1 260×260 mm vs Sidewinder SW-X2 3D Printer 300×300 mm — Sidewinder SW-X2 3D Printer wins (+33%)
- Price: M1 Pro S1 322.5 € vs Sidewinder SW-X2 3D Printer 285 € — Sidewinder SW-X2 3D Printer wins (+13%)
Which one to choose
Choose Sidewinder SW-X2 3D Printer if…
you value work area and price.
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.