Anycubic Kobra S1 Max Combo vs Prusa Research XL
Technical comparison · Fused filament fabrication (FFF/FDM)
Kobra S1 Max Combo leads on the available specs (starting with price); XL makes sense only for non-technical reasons (availability, support, ecosystem), or if the missing data matters in your case.
| Parameter |
Kobra S1 Max Combo
Anycubic
F2 · Intermediate
|
XL
Prusa Research
F2 · Intermediate
|
|---|---|---|
| Identity | ||
| Launch year | 2025 | 2025 |
| Use tier | F2 — Intermediate | F2 — Intermediate |
| Price | ||
| Price (€) | ~799–1099 € | ~1700–1900 € |
| Price updated on | 06/2026 | — |
| Universal specs | ||
| Dimensions (W×D×H) (cm) | 50.27 × 48.3 × 58.4 cm | — |
| Work area (mm) | 350 × 350 mm | 300 × 300 mm |
| Z-axis height (mm) | 350 mm | 330 mm |
| Power (W) | 2200 W | — |
| Voltage (V) | 220 V | 230 V |
| Maximum speed | 600 mm/s | — |
| Declared precision | 0.05 mm | — |
| Category specs | ||
| Footprint X×Y (short side) (mm) | 350 mm | — |
| Build height Z (mm) | 350 mm | — |
| Kinematics | CoreXY | — |
| Max nozzle temperature (°C) | 350 °C | — |
| Max bed temperature (°C) | 120 °C | — |
| Max print speed (mm/s) | 600 mm/s | — |
| Enclosed chamber | True | — |
| Filament sensor | True | — |
| Auto bed leveling | Mesh | — |
| Standard nozzle diameter (mm) | 0.4 mm | — |
| Multi-extruder | False | — |
| Native Klipper | False | — |
| Input shaper | True | — |
| Multicolor printing | True | — |
| Multicolor requires accessory | True | — |
| Max colors | 4 | — |
| Ecosystem | ||
| Cloud dependency | No | No |
| Software notes | The firmware runs on a proprietary Kobra OS layer built on top of Klipper; the official slicer is Anycubic Slicer Next, derived from OrcaSlicer, available for Windows and macOS. Third-party OrcaSlicer is also supported. Remote monitoring and control are available via the Anycubic app (iOS/Android) over LAN, with no mandatory cloud connection required for core printing functions. | Compatible with PrusaSlicer (open source, with material profiles verified and maintained by Prusa Research), OrcaSlicer, and SuperSlicer, as well as any slicer that exports standard G-code. The firmware is based on Prusa Research's open-source Marlin fork, with input shaping support. Unlike Bambu Lab models, which use a partially proprietary protocol and work best with Bambu Studio, the CORE One L accepts generic G-code via USB, SD card, and PrusaConnect. The user is not locked into a single software ecosystem and can freely modify or update the firmware. |
The differences that matter
- Price: Kobra S1 Max Combo 949 € vs XL 1800 € — Kobra S1 Max Combo wins (+90%)
- Work area: Kobra S1 Max Combo 350×350 mm vs XL 300×300 mm — Kobra S1 Max Combo wins (+36%)
Which one to choose
MakerSpecs is an independent atlas. We don't sell products: this comparison links to both sheets, where you'll find complete data and official links.